The power bandwidth of an amplifier is sometimes taken as the frequency range (or, rarely, the upper frequency limit) for which the rated power output[1] of an amplifier can be maintained (without excessive distortion) to at least half of the full rated power.[2][3] (Some specifications may mandate 100% of the rated power; sometimes referring to the full-power bandwidth.)
It should not be confused with "half-power" bandwidth, only used in conjunction with filter frequency response curves, where it refers to -3dB points in the frequency response of a band-pass filter.
Data sheets for operational amplifiers often use the term (full-)power bandwidth to indicate the highest frequency at which the achievable peak-to-peak output voltage swing is still equal to the DC output voltage range. This is also sometimes described as the slew-rate-limited bandwidth. The full-power bandwidth is then related to the slew rate
in volts per second and the peak-to-peak voltage swing
by
where is expressed in hertz. In data sheets for commonly available operational amplifiers, slew rate is usually given in volts per microsecond.
Specifying power bandwidth#edit
References#edit
- ^ Audio Power Amplifier Design Handbook by Douglas Self; page 22
- ^ "Answers - the Most Trusted Place for Answering Life's Questions". Answers.com.
- ^ The sound reinforcement handbook by Gary Davis, Ralph Jones; page 197
- ^ "Archived copy" (PDF). Archived from the original (PDF) on 2009-12-28. Retrieved 2010-02-06. TDA1013B power amplifier IC specifications
This article is mirrored from “Power bandwidth” on English Wikipedia, revision 1288105658, written by Wikipedia's contributors and licensed CC BY-SA 4.0. Editing it here creates a Quire copy with its own history.
Synced with Wikipedia revision 1288105658 · just now